亚星游戏官网-yaxin222

门户 | 手机客户端 | 论坛 | 人才 | 百科 | 搜索 | 技术问答 | English
待解决问题
设备R1和R2路由器远程无密码无用户无法登录那里错了求各大师指点
离问题结束还有0天0小时  |  提问者:雾里看草   |  提问时间:2022-6-6 17:17
R1
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname R1
R1(config)#interface gigabitethernet 0/0
R1(config-if)#ip address 192.168.1.1 255.255.255.0
R1(config-if)#no shutdown

R1(config-if)#
%LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to up

R1(config-if)#exit
R1(config)#exit
R1#
%SYS-5-CONFIG_I: Configured from console by console

R1#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
R1#exit


R2
Router>enable
Router#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
Router(config)#hostname R2
R2(config)#interface gigabitethernet 0/0
R2(config-if)#ip address 192.168.2.1 255.255.255.0
R2(config-if)#no shutdown

R2(config-if)#
%LINK-5-CHANGED: Interface GigabitEthernet0/0, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up

R2(config-if)#exit
R2(config)#exit
R2#
%SYS-5-CONFIG_I: Configured from console by console

R2#ping
Protocol [ip]:
Target IP address:
% Bad IP address

R2#ping 192.168.1.1

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.1.1, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)

R2#configure terminal
Enter configuration commands, one per line. End with CNTL/Z.
R2(config)#line vty 0 4
R2(config-line)#no login
R2(config-line)#exit
R2(config)#enable password 123
R2(config)#exit
R2#
%SYS-5-CONFIG_I: Configured from console by console

R2#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
R2#
R2#exit


R1
R1>telnet 192.168.2.1
Trying 192.168.2.1 ...
% Connection timed out; remote host not responding
R1>
问题答案 ( 1 条 )
R1 R2不通呀
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.1.1, timeout is 2 seconds:
.....
Success rate is 0 percent (0/5)

telnet也要开权限Enable
来自电脑 |  回应该答案 (0)  |  回答者:1441574881   |  2022-6-10 19:31
 
我要回答:  回答字数在10000字以内

 

热点问题
XML 地图 | Sitemap 地图